Restoring the Skeleton Army (Part the Fourth)

 

As some have you have surmised, I've been a bit busy recently. We've had a new bathroom, new windows, a patio is due next week and as for the wiring.... we've needed to find another £5000 on to of our budget once the walls were chased out. And then there is the matter of the heatwave here in England that shows no sign of abating. My classroom has been pushing 30 degrees most days over the last few weeks and keeping the children safe and cool has been a challenge to say the least.

Even so, I've dabbled with my figures. Often for five or ten minutes at a time and I've managed to complete another three skellies. 

I've stuck to my guns and used the same method we are now familiar with and I've continued to try out different shield ideas as you can see here. Mot too sure about the red backed shield now I've seen it photographed - it looks a bit squinty but I'm happy with the other two. All three of these shields are my greenstuff copies and I've continued to leave them with black boarders like Phil Lewis did back in the 1980s. 

Here's the whole bunch all together. I'm currently working on the next three models and when they are complete I'll be a third of the way through the infantry. Remember, I want the whole project complete before year's end so even though life has been holding me back a bit, I'm still making progress of a sort. 

The bases are not making me happy though. I'm going to paint something different today and play around with the system. I want them to look brighter than they are at the moment to help life the models a little. I'd rather repaint seven bases than thirty. 

I'm sure many of you have heard the sad news about the death of GW oldie and ultimate Robin Hood, Tim Pollard. Long time readers will recall my interview with him twelve years ago and his revelations of the whereabouts of many old school GW pieces of art. It was very sad to here yesterday that he lost his battle with cancer and especially poignant that his wife, Sally, also died of this terrible disease some years ago. 

I suppose Tim's biggest contribution to classic Citadel was his amusing and highly irreverent naming conventions for many of the mid-eighties figures. With my favourites being the c18 Zombies... who cannot love Pek-Gregri, Peeled, Bowelburst and of course Gavin!!???

Restoring the Skeleton Army (Part the Third): Phil Lewis and Colin Dixon shield tributes

Good evening all...

The radiators have been ripped out and we stand ready to skip the bathroom. Tomorrow is the last time I'll have a shower and toilet for a while (eek!). The plumber reckons two weeks to finish the new bathroom and while he is working, we are having the wiring in the front room sorted while we await the new French doors. With thick, oak flooring due and new plasterwork also enroute it is going to be an expensive couple of months!

It is also going to be a busy couple of months. We have the school inspectors in AGAIN next week. The religious type this time rather than OFSTED, who we dealt with back in October. I work in a CoE school and every five years or so our religious implementation is examined. Additionally, the school reports are due in a couple of weeks to boot. Basically, not much time available for Orlygg to Old School. 

Still, I used the time I had this afternoon wisely. A few days ago I was moving boxes around ready for next week when I found the small stack of donated White Dwarfs. Plucking up issue 101 reminded me that this is the issue where John Blanche waxes lyrical about '80s shield painting techniques. Way back when at the start of my blogging career this issue was highly influential in me developing my 'Citadelesque' painting style... in fact the famous tutorial on the first page that let's you into the secret of painting an 'Ogre Face' was what finally made the penny drop for my freehand painting.

Flicking through, I noticed a couple of nice shots of two plastic skellies from the original Skeleton Horde set by the looks of it. One painted by Phil Lewis and the other by Colin Dixon. Such a clear presentation of two classic paintjobs inspired me to have a crack at some tribute shield decoration while strengthening my freehand skills. 

Dazza36 suggested I experiment with Acrylic Resin with my press mould a few weeks back. Well, my order arrived and I've been testing this new material out. Though not as tough and hardwearing as original greenstuff, it does pick up the detail like nothing else I've tried. So far, I've cast up a couple of shields as you can see in the second picture. I'll be moving to this stuff once I've worked through all of the greenstuff shields I've made as its faster drying. If there are any experts in this stuff out there reading - can you mix more powder than water and get a stronger material? Does this stuff even work like that?

MisterC - he who donated the incredible Skeleton Army - also sent a fair few paints with the boneyard boys. Truth be told, I've been rather too excited with my new forces of undeath to investigate too closely at the paints. Having now done so, I've been pleasantly surprised to find the other three paints from the Metallic Paint Set. They are all still quite useable, save for what I assume to be Burnished Gold which has separated and clumped together like many a shiny pot from the past. 

So, once again... MisterC... I salute you for these wonderful additions. I could be wrong, but I am fairly sure I now have all of the original early Citadel paints sets completed. Just need a modern Goblin Green from Coat d'Arms to replace my dried up one. 

Anyway, on to my skellies and their shields. In the images below you can see the original inspiration and my attempt at the design. I didn't want to straight copy but get a feel of the design. I lack the skill of these two classic painters of yore sadly. 

This one is by Colin Dixon and I've dubbed it 'Hair Skull'. I'm not sure if the background is actually a nice barnet for a grinning boneface but I'm going for it all the same. I painted the skull first using my usual method and then added the strange swirls. Looking back, I see I need a darker brown background to this design (I plan to have another crack and this at some point) and I need the 'hair' to taper at the bottom of the shield rather than circle round. But I'm pleased with the result. 

Phil Lewis, the former lensmith of WD, is responsible for this cracking design. I've called it 'Blue Hair Skull'. Again, I wouldn't mind another attempt at this one soon but I'm fairly pleased with the result. Sure, my example is more Jim Robinson from 1980s Neighbours than Phil's big toothed troublemaker. And my pupils are much too large as well. Though the keen eyed of you will notice that I've added the bronze studs too. 

And here they are, alongside the other motley lot from my Restored Skeleton Army. So far its just four fairly mixed figures. With twenty-six more models to go I'm going to have plenty of opportunities to try out those classic shield designs as well as source a few more. Of course, if you've got a shot of a decent design from an old WD please do send me word of where to find it. I'd love to try out some more vintage ideas from the masters.

Orlygg

The Return of the Elven Animal Keepers

 

Games Workshop have re-released the old Elven Animal Keepers as part of their ongoing 'Old World' range of products and my order was waiting for me on my doormat this afternoon as I arrived home from work. 

I hadn't expected them until Wednesday.

To be honest with you I was skeptical of the release and of GW themselves. Being an enthusiast of the Citadel of old when you could ring up mail order and buy individual titan guns from years previously, surely modern GW couldn't offer old Orlygg anything?

I'm happy to say that I was wrong. 

It is a great release and I'm really pleased I took the plunge and bought a set.  Let's have a closer look...

Obviously the packing is not on par with the glory of the '80s cardstock, but I wasn't expecting it to be. And as you can see, polystyrene (can that even still be used?) inserts to protect your beautiful models have long departed in favour of a plastic case where your models slide around and bash each other. No difference from a blister pack of old I suppose. Even so, I loved opening up the box and seeing all the models for the first time. I was trying to remember the last time I bought something from GW... I think it was the Famous Familiar set they put out 10 years ago or more, along with the elementals. 

For a second, the weight of the box mislead me to thinking they were resin versions but a quick rattle of the delivery box allayed my fears. As you can see here, the figures and beasts are just as crisp and engaging as there were way back in 1987 when Jes Goodwin first sculpted them. 

And look at that tab!

GW1987... it is brilliant to be able to buy models from our era fresh from the casting room and this will be a real blow to the eBay scalpers. The bear figure alone goes for far too much money. I am glad the gamers old and new now have access to these models. Interestingly, these figures are totally new to me. I never saw them back in the day or owned them myself. I think I can remember seeing them amongst Bryan's collection, I will have to check my photos. 

The full set. Gorgeous models and a real surprise. I have to admit to being impressed and I'm tempted to order the Bugman's Cart (incidentally, also on the advertisement I've used to open the post) next. Obviously for someone without a leadpile of any significance, such a release is a godsend. I'm now in a quandary as I'm supposed to be working on that Skeleton Army... 

Steady Orlygg... don't get carried away.... 

Obviously, a set like these needs painting up in tribute of the Citadel originals. But that will be a project for the summer holidays when I've been driven mad by bone, rust and skulls. 

If any of you are on the fence about these I'd heartily recommend picking up a set. It is not often that I say this, but 5 stars to GW for releasing these models and getting them to me so quickly. 

Orlygg. 

Restoring the Skeleton Army (part the second)

Half-term just flew by. We've got a fair bit achieved inside the bungalow too, mostly stripping away layers upon layers of ancient wallpaper from the lounge and corridor. Everything was papered it seems, and then painted over in thick, 1970s and '80s house paint, ceilings included. With the new bathroom due to be fitted the week after next, and new flooring and plasterwork imminent after a window replacement... it is full on (and expensive) at Orlygg Towers.

As you can see, I still found time to work on the Skeleton Army project. The two models you can see above are my test pieces now that all thirty infantry models have been fully restored. And what a job that was! As you may have seen, many of these models were snapped or damaged in some way with nearly all of the weapons missing. I think I counted five complete models in the entire assemblage. 

Many of you dear readers have supplied me with bits of plastic skeleton or complete frames over the last few months. Every donation has been carefully put away and used to rebuild this magnificent regiment. I've even had a go with the infamous plastic skeleton armour pieces to create a skeletal champion to lead them. I used a mixture of poly-cement and greenstuff to repair splits and breakages, going as far to sculpting simple joints on the shoulders of those models who lack them. A pin-vice was handy to drill out suitable holes here and there to affix to my armless skellies. 

Oh, and the sprues I built up for the Skeleton Horde remain unused, so the Horde models will too see the light of day eventually. 

The hodgepodge of materials means that my army is a little lopsided in regards to arms. I have far more scimitars than I do anything else and only two spears. Not that you can notice once the models have been assembled and ranked up. I must confess to being impressed with some of the posing done by the former owner, very dynamic. Inspired by this, I set about wherever possible having plenty of swords and axes in the air or shields held out in front as if preparing to receive a charge. 

After a few days of tinkering all of the models were repaired. The next pressing concern was the shields. Did I have enough for a project of this size? A good rummage through supplies found that I'd barely meet the needs of my troops. Beyond bankrupting myself purchasing old shields on eBay for £7.99 for four I would be limited in scope.

But, I'd found an old press mould kit in the attic. I'd barely used it back in the heady Oldhammer days of my old life so thought, 'why not try and see if it is possible to press mould some of my favourite old plastic shields?' 

The mould itself was bought on Amazon a long time ago. It is activated by hot water. Simply boil the kettle, drop in the material and wait a few minutes. The mould becomes very, very soft and easy to manipulate. I used the back of a spoon to roll the stuff flat and level before returning it to the hot water. I then selected a few suitable '80s shields, scooped the mould out, laid it flat on an old coaster and pushed the shields into the material. Not too hard mind, I found the a slow, gentle bit of pressure got the best results. 

I trialed a few different methods that can be seen here. First up, PVA glue. I simply poured the stuff over the impression and left it to dry in the sun. I repeated the process three or four times over a day or so and the first few shields you can see above in white were the result. Too brittle for our purposes really, and I found the the glue curled as it dried. Next up, I experimented with new fangled 'air drying clay' from one of MFM's kid's craft sets. Lovely detail on some of the shields bit it was quite brittle and hard to cut. The small elf shield on the bottom row was the most detailed of this run. I was expecting the clay to be hard and smooth when cured but it was actually just a kind of foam. This stuff could be useful for other projects, just not with these shields. 

Finally, I reverted back to greenstuff. Initial experiments where far too thick, as can be seen with the top row, but over time I realised that less is more when creating these kinds of press moulds. I'd roll a little bit of putty, wet the inside of the mould and just push down hard. Detail was often lacking until I really worked the putty in my hands and run it under a hot tap. The greenstuff was then very elastic and made the clearest casts, as can be seen above next to the original shields. Nail scissors and a sharp blade made short work of any unwanted greenstuff. 

I'm pleased to say that the two test-piece skellies in the first photographs both have my press-cast shields on them. Can you tell the difference? 

And does this make me a recaster now? (;

Here are the two restored figures alongside a skeleton a did a few weeks back fresh from the sprue. I've kept the painting method the same only I now drybrush on the ribs. I have way too many models to painstakingly paint each chest and it seems to work well. I'm no longer using the old Citadel Brown Ink to shade either, instead I'm using the Windsor and Newton Sepia I mentioned last post. With the metallics, I've experimented with some of the other inks to try and create a orangey rusty effect on the shields and weapons too. 

The next stage in this project is to get a few more test models complete to really refine the process. Then I've got to basecoat the new arms and skulls I've taken from pure sprues. I'll be using Orc Brown to do this. I'll then wash the lot of them with sepia ink in one go. Then its just slugging on with the painting of the remaining twenty-eight figures. 

With an inexhaustible supply of shields to paint now, I'll be cutting down on the monotony playing around with some new designs, including an attempt to reimagine some of the actual shield designs painted by Colin Dixon et al back in the 1980s. Of course, I still have a fair few metal figures from you kind readers to get distracted by too. 

Onwards,

Orlygg

Orlygg on Orcs and Inks

The holiday's have arrived and the thick dust that settled across our home has been borne away. We've had the builders in this week to rip out the homemade fireplace we inherited with the house and replace it with a modern log burner. It is nice to make progress with our run down house. The bathroom is next and I had to spend an eye watering amount of money to purchase all of the fixtures and fittings for that task. MFM is of course happy that after so many trials and tribulations we have begun work in earnest.

Secretly, I'd love to be spending the money on 1980s Citadel and retro inspired goodies galore. But I refrained, sensibly. I have however been getting the paints out and found myself in a conundrum. Just how do you paint an orc?

You might recall, I was sent a bunch of sticky, stinking models a while back. One of them was the green-skinned chap you can see atop this blog. The others were all riders and without any mounts they will have to go back into my lead scatter (its too small to be called a pile) until suitable models can be found. 

I must admit to finding him a challenging model to paint. Not because of any real detail, or lack of skill... but because I couldn't fathom why it didn't look like an '80s orc. Part of the problem is that I don't have a huge amount of greens to choose from. My proxy Goblin Green is on its last legs and I don't have much Ork Flesh kicking about to squander. I'm kicking myself now, considering I was standing in front of the Coat d'Arms range last month and didn't do anything about it, save my Bleached Bone. Lessons learned for the future. Anyone know a reliable website that sells Coat D'Arms paints?

In the end, I used Scorpion Green - a '90s classic still in its hexagonal paint pot. It was way too much of a vibrant colour to use without mixing in a little brown and yellow. But with this as a base I worked up the figure trying to improve the quality of my flesh painting skills. In the end, I think I added one highlight too many, judging by the photo above. But I knew there was till much work to be done to produce more consistent models. But still, he didn't look right. I knew what I wanted, a orc who'd fit alongside the ranks of White Dwarf circa 1989 but just couldn't achieve it. 

So he sat on my painting area for a while. Fast forwards today, and I was up in the attic sorting stuff once more. Near the last box full of bits and pieces I found the other half of my final painting set up from my old life. Much like before, it had been very evidently just tipped into a box and dumped into storage. There were a number of broken and half-finished models from summer 2020 all of which I can now complete but there were also a selection of my old inks!

Here is my old school ink collection as it stands now. I've managed to rebuild most of the set with only Chestnut Brown missing. I've even begun some boring comparison work comparing the '80s shades with the ones I got in the early 2000s. You can see them here in the hinged black top pots. Some a wildly different but others, especially the blues, match closely. Thanks to Chris sending me quite a few stopper bottles of ink I can compare those too. I remembered Andy Craig telling me that they used Windsor and Newton inks in the Design Studio during our era so I've got a couple of bottles of those too. I've not ever used them but I'm happy to try anything these days. Have a sepia ink that will be a good proxy for Chestnut Brown and I hope to test this colour out on some plastic skellies soon. 

Returning to our friend the orc, as soon as I splashed on a bit of '80s green ink he came together. I used it to shade various parts of his body and even added it to a little purple mix to highlight his lip. I'd clearly forgotten how important the inks were to getting the look I'm after. 

Going forwards, I'm going to try out this mix for my next goblinoid. Goblin Green/Ork Flesh base coat, shaded with class Green Ink with the darker areas touched up with a green and black in mix. I'll then add yellow and bone to the base in stages and then work up the flesh, trying not to over highlight the muscles. Do any of you have a preferred process for orcs and goblins... I'd love to know because I'm not satisfied with what I have at the moment.

Also, this orc gave me the opportunity to play around with armour as well and I used blue and black ink washes to stain the chainmail and give some lived in grit to his helmet. I think they are helping me reached back to my old style. The trouble is, without the actual old painted figures in front of me it is hard to make comparisons and remember what I did in the past. I'm certain I've painted figures I've forgotten about now.

I did find an old photograph of my painted stuff. 

Look...

This picture must be from 2015. So ten years ago and I know I painted much more than this. I cannot see any of my beloved McDeath project that I was so close to finishing either so perhaps it was taken before I began that project. 

I do know that this cabinet was emptied of my belongings and then used outside to hold plants. It was rained on throughout the winter of 2020 and I last saw it looking rather saggy and decrepit a few years back as I was collecting my kids. A sad end for a cabinet that house my figures for so end. 

But where are the figures themselves? Anyone seen them for sale?  

Here's to building a new collection of figures, and perhaps one day, getting a bigger cabinet.

Orlygg

Restoring the Skeleton Army (Part The First)

 

And on a penny, life spins you in a different direction. It stops you in your tracks and makes you rethink a part of your life. Today was just such a day for me. Chris sent me a package and it contained the battered remains of the classic 'Skeleton Army' box from 1989 as well as another stash of old school Citadel Colour paints. 

To say I was amazed was an understatement. If truth be told, I received the package when I was out of class and supposed to be doing something completely different with my time. But I must confess spending a good ten minutes just pouring over the treasures Chris had sent me.

Chris, I am so, so grateful for this and it will seriously change the direction of this blog and my hobby time. For now, I have an actual army in embryo. Something to work with to get myself back on the table after beginning from nothing six months past. 

Chris.... I salute you and I'll salute you again!

This collage shows most of the contents of the Chris' package. The top half shows off the additions to my old school paint range with several unopened pots of Blood Red, a fairly standard paint that gets a lot of use from me. There are also more obscure tones such as Night World Blue which I confess I have never heard of before. Classic pots of ink were also found inside with some brown, red, purple and blue now in my possession. The inks are an essential ingredient in getting the 'look' of an '80s style model and I'm looking forwards to using them and matching them to other inks on the market. A real bonus was an unopened pot of Bolt-Gun Metal that hadn't turned into a solid mass of gunge. I've been matching many of the old school colours I have to the enormous amount of paints Ian sent me a while back and have some real success. 

The bottom half shows the extremely worse for wear Skeleton Army in all its glory. There are enough pieces to make at least nine skeletal horses and there are at least thirty-four useable skeleton infantry. I have seventy-five percent of the plastic chariot too, with Chris writing to me to say that the missing wheel may still be discovered in his stash. When you add cavalry bases and over twenty Citadel shields there is a lot to take in. I have numerous broken bits of skellies too and about twenty hand weapons of various types. Four skeletons are mint and can be painted up pretty much immediately.

You can appreciate why my jaw hit the floor of the staffroom. A young lady teacher walked past me bemused at my joy. I tried to explain but '80s era Warhammer is like 'Nam. 

You had to be there.

This collage shows the collection in more detail. None of the sprues are complete but there is more than enough remaining to produce a decent mounted unit and nearly all of the armour pieces are present. Thankfully, most of the long lance arms are in very good condition. The actual skeletons themselves are in a sorry state with only four of them being complete. The remaining twenty-odd figures look to have had their weapons snipped or whole arms removed. Presumably for some long ago conversion project but I think I have enough loose weapon arms here to restore the lot. 

The keened eye will notice some green based skellies which look to me to have been an earlier set. Most likely original Horde figures by their paintjobs and round shields. Still, they are better finished than the first set of these models I completed back in the 1980s. They appear to have the remnants of Arcane Armorials on the front of them. Some of which may be salvageable. 

There is a single metal model here too. A C34 Wraith Rider - complete with old Citadel flying base. Chris wrote to say he was looking forwards to seeing what I did with the model. I have to say, I agree with him whole heartedly - for I can't wait to see what I do with it either!!

As I said at the beginning of this post, sometimes plans get thrown up in the air and you head off into an previously unexpected direction. Today is such a day. With Chris' generosity still lifting this grognard's soul, I have decided to fully restore this set and bring this Skeleton Army back from the dead (see what I did there?) over the next months. I'm giving myself the time limit of New Year's Day 2026 for these models, and my Horde figures (who are all mint pieces needing no restoration) to be fully painted and ready to field. That's a little over six months. With my time commitments often tugging me elsewhere that is going to be some doing but fate as decreed that in less than a year after returning I would have a small undead army from nothing is frankly unbelievable. 

I had another project I was just about to commence with too, which you will also see soon. It's another great love of mine from '80s Warhammer that I've written about many times before. And of course, you will continue to see metal figures from my small stash being painted up when I need a break. 

So I'll end with another massive thank you to Chris for sending these treasures to me. Some might see them as just a pile of plastic tat to but to me these old crumbling plastics and are precious link to an era I love and a crucial escape from the relentless challenge of doing up a rundown house.

'Stage One' of this project will be to rebuild the infantry and repair much of the damage these bone-boys have suffered over the years and get them undercoated once more. I could do with some advice on basecoat sprays... anyone using a decent white for batch spraying? Please let me know if you have any recommendations. 

I really can't wait to start!

Orlygg

PS: If you've got a spare plastic skeleton wheel to spare please do let me know (;

C17 Reaper skeleton: Does Undeath have a colour scheme? And some more goodies...

Has it been another week already? Work has begun on our archaic home after so long. MFM and I have been stripping decades old wallpaper, pulling down dusty curtains that are probably older than us and clearing out the hideous bathroom to make way for tradesmen to begin work. Without boring you too much, we are having new French style doors, a new bathroom and the old fireplace ripped out and replaced with a more economical and environmentally friendly woodstove. Later on, we will need to replaster and lay flooring but it is all hands to the pumps. On top of all that, we just had SATs week in school and it is the last day on term on Friday.

As you will no doubt imagine, there hasn't been a huge amount of time for hobby. We did the garden today, and I got to play with some of the new tools we have had to purchase (though the lawnmower finally packed in) but there were a few hours spare this afternoon to get the paints out a crack on with a figure.

That super-gent extraordinaire (Sleepysod), who if you recall we met quite randomly at Salute a few months back, had a few spare skellies kicking about and he sent them my way. Opening any package is always fun but I was dumbfounded to see one of my all time favourite models in my hand. The Reaper skeleton from the C17 range. I've always admired this figure since seeing it the the WHFB Third edition rule book in one of the battle scenes. He never ever seemed to end up in my collection despite years of looking and so it was wonderful to finally have one of those 'never did get your hands on 'em figures'. 

Huge thanks to Sleepysod for being so generous AGAIN and I will have to salute him once more. Sleepysod.... I salute you for really brightening up this old grognard's life with a tiny, scraggly, skinny piece of lead.

I approached the figure in much the same way I would something from the skeleton Horde. Orc Brown base, Chestnut Ink wash and then highlight with Orc Brown and Bleached Bone. I'm still debating about adding a super-highlight of Skull White at some point on the skulls and hands of my boneyard brothers (especially now I can actually paint half-decently again) but the jury is very much out on that at the moment. 

I've got some pretty grotty metallics to work with here. It is well known that the old '80s silver and gold paints condense into a solid mass of gunk. Even so, I have a few survivors. Even so, I have to bite the bullet and get my hands on something more reliable. I've even heard some good things about the modern Citadel range!!! If any readers have any recommendations for silver and gold replacements please do let me know. 

Despite the challenging state of some of my paints, I dry-brushed over the tatty chainmail in Bolt-Gun Metal and washed with Chestnut Ink and them some Hobgoblin Orange for rust. It didn't really take to the chainmail itself though it worked well for the blade of the scythe. You may remember that metal work on my skellies is something I was keen to work on? 

Originally, I went for blue rags. But it just didn't look right. The shade was just too bright and happy, at least to my eye. This got me thinking... does undeath actually have a colour scheme? For me, black, bone, white, brown and orange seem to work and reflect the tattered remains of long dead corpses rising from their graves. I know others go for a more brightly coloured approach... and bizarre as it sounds, I am fine with bright, almost garish colours on a shield or banner. But never actually on an undead figure.

Surely I cannot be alone in my fastidious ways? 

Here are the rest of the figures that Sleepysod sent me. All now sleeping in the Dettol bath. I'm sure that the second figure from the left is a Marauder skeleton. I adore the musician model as well, with the multi-skulled drum set. He's most likely going to see paint before the end of the week as I'm rather excited about painting him up. Only problem is those drums... a bone finish or gold? Decisions.. decisions eh?

I also have to salute Stuart this week as he sent me a package of bits and bobs. Mostly modern castings of some Asgard classics. More about them in the future. But, Stuart... I salute you too. I'm intrigued by these early figures as I know very little about the range. I'll do a little research when time is more available and perhaps try and older old school paint approach with these... right back to the early '80s! 

One final note, Stuart let me know about the '80s Wood Elf beastmaster re-release over at the GW website. We spent Saturday morning messaging each other waiting for them to go online. If you haven't seen it yet, all the old animal keepers of old have been cast back up with their new Wood Elf Old World range. I must admit to having taken the plunge and bought the set. I'm optimistic about their quality. While I was on the site, I noticed a few other '80s classics were hanging about. Bugman's Cart among other things.

Ooh, I haven't checked to see if there is anything decent in the undead section! 

Speak soon,

Orlygg